Tunnel details

I had about an hour this evening and nearly felt overwhelmed by all the details that need to be completed before I can call the tunnel done:
1) Grind the underside of the tunnel
2) Cut steel and weld in the gaps on top
3) Plug all the burn throughs
4) Close out the stick shift hole
4) Seam sealer everything
5) Primer

Only thing to do is just start working.  I finished number 1 and 2/3 of number 2.

Here is the passenger side of the tunnel as it is right now

 Close up of the driver's side.

Underside.  It has come a long way since I tried to simply slam it wide enough with a hammer.